carbon fibre reinforced plastic cutting machine

With the continuous development of composite materials, in addition to glass fiber reinforced plastics, there are carbon fiber reinforced plastics, boron fiber reinforced plastics, etc. The following is related to carbon fiber reinforced plastics, which have been more and more widely used in aircraft, rockets, missiles, and space navigation.

As the use is more and more extensive, the cutting demand is also more and more, many manufacturers from manual cutting to intelligent cutting, here to recommend a carbon fiber reinforced plastic cutting machine, mainly for cutting composite materials and other flexible materials equipment, his cutting speed, simple operation, can perfectly achieve the pattern you want to cut, the whole automatic operation, no human involvement, the use of efficient, high-precision servo motor, can be fast and more accurate to achieve intelligent cutting.

carbon fibre reinforced plastic cutting machine

Advantages of carbon fiber reinforced plastic cutting machine:

1. Independent development and design of CAM software, intelligent software compensation, optimization of the cutting path, to improve the energy efficiency of production.
2. Adopt high quality linear guide, accuracy error ±0.1mm.
3. Japanese Panasonic servo system provides power and stable continuous power supply.
4. Carbon fiber reinforced plastic cutting machine can be equipped with a variety of tools for cutting materials in different industries to increase the added value of enterprises.
5. Carbon fiber reinforced plastic cutting machine is fully automatic equipment, automatic loading and unloading, saving labor cost.
6. The system intelligently optimizes nesting and cutting to provide better cutting and filling paths, saving more than 30% of material.
7. Power-saving frequency conversion vacuum adsorption, saving more than 30% of electricity.
8. Infrared sensor safety device to ensure the safety of the operator during the high-speed movement of the machine, while avoiding the loss of cutting materials.
9. Aluminum-magnesium alloy adsorption platform, durable and not deformed.
10. Anti-static interference and soft start device, to protect the safety and stability of the equipment.
11. Dustproof treatment of the whole machine, reduce the equipment failure rate and extend the service life of the equipment.

AOL service

Properties of carbon fiber reinforced plastic:

1. High strength and good elasticity: the specific strength (i.e. the ratio of tensile strength to density) of carbon fiber is 6 times that of steel and 17 times that of aluminum; the specific modulus (i.e. the ratio of Young’s modulus to density, which is a sign of how elastic the object is) is more than 3 times that of steel or aluminum. High specific strength, it can withstand large working load, and its maximum working pressure can be up to 350 kg/cm.
2. Good fatigue and wear resistance: its fatigue resistance characteristics, much higher than the epoxy resin, but also higher than the metal materials; graphite fiber has self-lubricating, the coefficient of friction is very small, its wear and tear than the general asbestos products or F-4 braid 5 ~ 10 times smaller.
3. Good thermal conductivity and heat resistance: carbon fiber reinforced plastic has good thermal conductivity, the heat generated by friction is easily dissipated, the internal is not easy to overheat and heat storage, and can be used as a dynamic sealing material. In the air, it can work stably in the temperature range of -120~350℃. With the reduction of alkali metal content in carbon fiber, the use temperature may be further increased; in inert gas, it can adapt to the temperature of about 2000℃, and it can withstand the rapid changes of heat and cold.
4. Good vibration resistance: it is not easy to resonate or chatter, and is also an excellent material for vibration and noise reduction.

Application of carbon fiber reinforced plastic:

1. To do sealing packing: with carbon fiber reinforced PTFE material, it can be made into sealing ring or packing with corrosion resistance, wear resistance and high temperature resistance; when used for static sealing, the life is longer, more than 10 times longer than general oil-impregnated asbestos packing. It can keep the sealing performance under the change of load and rapid cold and heat, and since the material does not contain corrosive substances, pitting will not happen to the metal.
2. Do wear-bearing parts: using it has the characteristics of self-lubricating, you can do special purpose bearings, gears and piston rings. Such as aviation instrumentation and tape recorders with oil-free lubrication bearings, electric drive internal combustion locomotive with oil-free lubrication gear (to avoid accidents caused by oil leakage), oil-free lubrication piston rings on the compressor, etc.. In addition, it can also use its non-toxic characteristics, used in the food and pharmaceutical industries to do sliding bearings or seals.
3. Do aerospace, aviation, missile structure materials. Since the introduction of carbon fiber reinforced plastics in the seventies, the development of rapid, increasingly widespread applications. In 1980, China has been successfully piloted and put into production, used in chemical, petroleum, electric power, machinery and other industries, as a rotary or reciprocating dynamic seal or a variety of static sealing materials.


After-sales service of carbon fiber reinforced plastic cutting machine:

1. AOL after-sales service team has more than 20 engineers.
2. There are at least 3 engineers for one agent/customer service, they all can speak English.
3. We support complete user manuals, usage videos and photos.
4. We support remote assistance to help you install and use the software.
5. We support 24*7 online guidance and service.
6. We guarantee our machines for 3 years, except for felt, knives and blades, during this period, if there is any problem, we will replace them with new ones free of charge by DHL, for knives, we will repair them free of charge within one year.
7. We promise to send replacement parts within 24 hours.
8. We will set up a service group for you, including AOL sales person, AOL engineer, AOL sales manager, AOL sales director and you (or your staff), if you have any questions, we will reply within 1 minute.
9. Free lifetime upgrade of AOL software.

CNC cutting machine after sales team

Leave a Reply

Your email address will not be published. Required fields are marked *