Aol radium laser – Ottomans cutting machine, seat cover cutting machine, vibration knife cutting machine professional manufacturer!
Today to discuss cutting machine in the use of a period of time after the body heat how to do?
1, there is attention to metal laser cutting machine cooling water temperature and air temperature should not differ too much, metal laser cutting machine laser and optical lenses are used in water cooling, as the water in the air will condense into cold water, when cooling Water temperature is lower than room temperature 5-7 degrees, the metal laser cutting machine and the optical lens surface will have water condensation, to a large extent affected the metal laser cutting machine and the optical efficiency of the optical lens through the laser energy and optical Accessories life greatly affected. Suggested that the majority of metal laser cutting machine users set the water temperature of 30-32 degrees, control the temperature of cooling water and room temperature is greater than 7 degrees.
2, the summer temperature, metal laser cutting machine cooling system working pressure increases, it is recommended before the advent of high temperature cooling equipment to check the internal pressure, different manufacturers of metal laser cutting machine pressure is not the same, the proposed maintenance Before consulting the specific parameters of equipment manufacturers.
3, the summer due to high temperature, cooling water deterioration will speed up the proposed metal laser cutting machine users with regular distilled water or pure water, or work with water, and regularly clean up the scale, so as to cause lasers and pipes attached scale affect laser power . Different types of metal laser cutting machine to clean up the scale is not the same, please operate under the guidance of equipment manufacturers.
4, the metal laser cutting machine dust is mainly metal powder, it is recommended regularly clean metal laser cutting machine electrical cabinet dust and check the working conditions of the cooling fan.
In the summer, do a good job of metal laser cutting machine cooling and cooling work is particularly important, pay attention to the above factors, you can avoid the metal laser cutting machine due to improper use of cooling water caused the failure.
